Power Supply Options

Discussion in 'Main Forum' started by -FAQ-, Sep 8, 2017.

  1. -FAQ-

    -FAQ- Member

  2. poeworld

    poeworld Administrator Staff Member

    Because of the way Ubiquiti devices work - the best method to mix UBNT and PoE cameras is to run the PoE device at 48 volts, then on a per AP basis, to step the 48 volts down to 24 volts on those ports needed. The GAF-24v15w (equivalent to the WT-GAF-24v15w)device works with any PoE switch and will down convert the PoE voltage (47-56 volts) to exactly 24 volts at Gigabit speeds.

Share This Page